Got this from a US supplier on eBay. These have a real carbon layer unlike the fake 3M sticker stuff commonly available in Bolehland nowadays. Cost including should be between 300-340 smackers (USD 101.72) depending on the exchange rate. Picture of the nice packaging
Includes a brochure.
Opening the box revealed the following. There is an adhesive layer on the packaging which the carbon pillar trims adhere to to prevent movement and damage during shipping. Cool! But why so many pieces?
Picture below of the door pillars If you look there are already 4 sections each side not including the thin piece of plastic sectioning the rear door window but frankly I would just cover up the plastic and leave the smaller rubberized section alone.
Close up. Having done something similar during my SP days unfortunately this does not meet my quality standards. Seems to be only one layer of carbon cloth and too much epoxy or gel resulting in something too thick for my liking.
Also the carbon pillar garnish is slightly shorter than the pillar on the N16 by a couple mm.
I have decided not to use this and will custom make my own. Letting go for half the cost I bought this for. Anyone interested please contact me.